Scott Machinery Letterhead

Baileigh RDB050 Manual Rotary Draw Tube Bender


The RDB-050 manual tube bender was designed as an affordable bender that has enough capacity for just about any chassis fabrication shop. The RDB-050 is revolutionary in design, function and capacity. The RDB-050 is extremely powerful, and can bend up to 63.5mm OD mild steel with a wall thickness of 3mm and 50mm OD chromolly with a wall thickness of 3mm.

The most unique feature of the RDB-050 is that it has three selectable bending speeds. The proper speed for each application depends on the material type, OD, and wall thickness.

Note: Previously this model was made in USA (yellow colour)it is now made in China under licence to Baileigh.

All previous marketing material & videos of this model don't apply to the new 2016 Blue colour model RDB-050. The below video is for operation information only.
  • Up to 63.5mm OD capacity
  • Three bending speeds
  • Easy to read angle degree indicator
  • Dies available for 90 or 180 degrees
  • Anti spring back mechanism
  • Portable
  • All pivot points use aluminum bronze bushings and thrust washers for long machine life
  • Bends up to 200 degrees without the need to reset the machine
  • Comes complete with the stand, bend handle, and degree dial. Just add tooling and you’re ready to bend tube
  • Optional:
  • 25.4, 32, 38.1, 51mm tube formers available ex stock
  • Various centre line tooling available from 19mm – 63.5mm OD
  • Rotary indexing table

  • Note: Square formers are not available for this particular model

  • Nb. Machine supplied without tooling


Baileigh RDB-050 Maximum capacity
Round Tube Mild steel 64 x 3mm
Aluminium 64 x 3mm
Stainless 50 x 3mm
Chromolly 50 x 3mm
Solid Mild steel round rod 25mm
Maximum Centre Line Radius 176mm Dependant on material and diameter
Weight 132kg
Shipping size (WxLxH) 1118x686x1067mm, 0.82m3
Details are not binding All prices exclude GST.
0800 215 215